DELL 9.8(0.0) 사용자 설명서

Most ACL rules require one entry in the CAM. However, rules with TCP and UDP 
port operators (for example, gt, lt or range) may require more than one entry. The 
range of ports is configured in the CAM based on bit mask boundaries; the space 
required depends on exactly what ports are included in the range.

Example

An ACL rule with a TCP port range of 4000–8000 uses eight entries in the CAM.

Rule#  Data             Mask        From To #Covered

1 0000111110100000 1111111111100000 4000 4031 32

2 0000111111000000 1111111111000000 4032 4095 64

3 0001000000000000 1111100000000000 4096 6143 2048

4 0001100000000000 1111110000000000 6144 7167 1024

5 0001110000000000 1111111000000000 7168 7679 512

6 0001111000000000 1111111100000000 7680 7935 256

7 0001111100000000 1111111111000000 7936 7999 64

8 0001111101000000 1111111111111111 8000 8000 1

Total Ports: 4001

Example

An ACL rule with a TCP port lt 1023 uses only one entry in the CAM.

Rule# Data              Mask        From To   #Covered

1 0000000000000000 1111110000000000 0    1023 1024

Total Ports: 1024

Related 
Commands

ip access-list extended

Name (or select) an extended IP access list (IP ACL) based on IP addresses or protocols.

Syntax

ip access-list extended access-list-name
To delete an access list, use the no ip access-list extended access-
list-name command.

Parameters

Enter a string up to 140 characters long as the access list 
name.

Defaults

All access lists contain an implicit “deny any”; that is, if no match occurs, the packet 
is dropped.

Command 
Modes

CONFIGURATION

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

Access Control Lists (ACL)

249