Q-Logic 5000 사용자 설명서

5 – Diagnostics/Troubleshooting

Recovering a Switch Using Maintenance Mode

5-16

59096-04  A

S

In the event of a loss of power, the switch configuration may become corrupt. The 
file system on which the configuration is stored must be re-created. This option 
resets the switch to the factory default values including user accounts and zoning. 
Refer to the Reset command in the SANbox 5000 Series Fibre Channel Switch 
Command Line Interface Guide for the factory default values.

This option closes the Telnet session, exits maintenance mode and reboots the 
switch using the current switch configuration. All unpacked firmware image files 
that reside on the switch are deleted.

This option updates the system boot loader which loads the Linux kernel into 
memory. Use this option only at the direction of your authorized maintenance 
provider.

If you choose the Remake Filesystem option, you will lose all 
changes made to the fabric configuration that involve that switch, 
such as password and zoning changes. You must then restore the 
switch from an archived configuration or reconfigure the portions of 
the fabric that involve the switch.