Q-Logic FIRMWARE VERSION 7.4 사용자 설명서

3 – Event Messages

Critical Events

59060-05  A

3-47

A

Critical events are events that disrupt the administration or operation of the fabric, 
but do not require any action before you can proceed. The following lists each 
critical event and the event id number and message displayed, and provides an 
explanation of the message.

(C) (8100.0001) (Name Server) (Port: port_number) (Protocol violation from address 

FC_address)

Meaning:

There has been a name server protocol violation. Contact your 
authorized maintenance provider.

(C) (8300.0006) (Zoning) (Dropping lock held by domain domain_ID, Merge requests 

Meaning:

Another switch has held the fabric zoning lock too long. It is being 
released to accommodate another fabric zoning request.

(C) (8300.000A) (Zoning) (Fabric Busy, failing lock request from domain domain_ID)

Meaning:

Another switch in the fabric has requested the fabric zoning lock 
from this switch while this switch is processing zoning commands.

domain_ID)

Meaning:

Unable to complete the requested zoning command because fabric 
zoning lock is already held by another switch in the fabric.

(C) (8300.000C) (Zoning) (Couldn't acquire lock from domain domain_ID)

Meaning:

Fabric may be changing, couldn't acquire lock. Wait for fabric to 
stabilize, try again.

domain_ID)

Meaning:

Unable to release fabric zoning lock because it is held by another 
switch in the fabric.

(C) (8300.000F) (Zoning) (Failed to lock fabric, lock already held with lock id lock_id)

Meaning:

The fabric is already locked.

(C) (8300.0017) (The zoning database has been reset and zoneset zone_set deactivated by 

user user_name)

Meaning:

The zoning database was reset while a zone set was active. The 
zoning information was cleared and the active zone set was 
deactivated.