Q-Logic 59048-02 A 사용자 설명서
59048-02 A
5-1
Section 5
Managing I/O Blades
An I/O blade is a component switch of the larger SANbox2-64 switch. When you
configure an I/O blade and its ports you are really configuring the slot. Because
this configuration is saved on the switch CPU, any I/O blade that you install in that
slot will acquire that configuration. This section describes the following I/O blade
management tasks:
configure an I/O blade and its ports you are really configuring the slot. Because
this configuration is saved on the switch CPU, any I/O blade that you install in that
slot will acquire that configuration. This section describes the following I/O blade
management tasks:
Displaying I/O blade information
Changing the blade administrative state
Testing a blade
Resetting a blade
Hot Swap Wizard
5.1
Displaying I/O Blade Information
The Blade Information data window displays information for the selected I/O
blades. To open the Blade Information data window, choose the Blade Info tab
below the data window in the faceplate display.
blades. To open the Blade Information data window, choose the Blade Info tab
below the data window in the faceplate display.
describes the Blade
Information data window entries.
Table 5-1. Blade Information Data Window Entries
Entry
Description
State
Functional status
Configured Administrative State
I/O blade administrative state stored in the
switch configuration
switch configuration
Operational Administrative State
I/O blade operational state: online, offline,
diagnostics, or down.
diagnostics, or down.
Diagnostic Status
Results of the most recent diagnostic test
Temperature Status
Operational status based on internal
temperature
temperature
Temperature
Internal switch temperature reported by
this I/O blade
this I/O blade
Credit Pool
Number of credits in the credit pool
Zircon Version
Zircon processor firmware version