National Instruments PC-LPM-16/PnP 사용자 설명서

 

Appendix C     Using Your PC-LPM-16 (Non-PnP) Board

PC-LPM-16/PnP User Manual

C-10

 



 

 National Instruments Corporation

 

Interrupt Jumper Setting IRQ5 (Factory Setting)

 

If you do not want to use interrupts, set the jumper on W3 as shown in 
Figure C-4. This setting disables the PC-LPM-16 from asserting an 
interrupt line on the computer I/O channel.

 

Interrupt Jumper Setting for Disabling Interrupts

 

The PC-LPM-16 is factory-configured for the 

 

±

 

5 V input range.

Four ranges are available for analog input: bipolar 

 

±

 

5 V, bipolar 

 

±

 

2.5 V, 

unipolar 0 to 10 V, and unipolar 0 to 5 V. Jumpers W1 and W2 control 
the input range for all 16 analog input channels.

 

±

 

Select the bipolar (

 

±

 

5 V) input configuration by setting jumpers W1 and 

IRQ3

IRQ4

IRQ5

IRQ6

IRQ7

IRQ9

W3

W2

W3

IRQ3

IRQ4

IRQ5

IRQ6

IRQ7

IRQ9

W2