Netgear GSM7228PS-100NAS 사용자 설명서
Using the Command-Line Interface
10
ProSafe Managed Switch
Command Syntax
A command is one or more words that might be followed by one or more parameters.
Parameters can be required or optional values.
Parameters can be required or optional values.
Some commands, such as show network or clear vlan, do not require parameters.
Other commands, such as network parms, require that you supply a value after the
command. You must type the parameter values in a specific order, and optional parameters
follow required parameters. The following example describes the network parms
command syntax:
Other commands, such as network parms, require that you supply a value after the
command. You must type the parameter values in a specific order, and optional parameters
follow required parameters. The following example describes the network parms
command syntax:
•
network parms
is the command name.
•
<ipaddr>
and <netmask> are parameters and represent required values that you must
enter after you type the command keywords.
Require license
Require license
Supported
Supported
Require license
Supported
Not Supported
Not Supported
Not Supported
Supported
Supported
Supported
Supported
Not Supported
Not Supported
Supported
Supported
Supported
Supported
Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Format
network parms <ipaddr> <netmask> [gateway]
Command Group or
Command
Command
M5300-28G-POE+
M5300-52G-POE+
M5300-52G-POE+
M5300-28G
M5300-52G
M5300-52G
M5300-28G3
M5300-52G3
M5300-28GF3
M5300-52G3
M5300-28GF3
GSM7328Sv2
GSM7352Sv2
GSM7352Sv2
GSM7228PS
GSM7252PS
GSM7252PS