Netgear GSM7228PS-100NAS 사용자 설명서

•  Static  - The port-channel is statically maintained.

•  Dynamic  - The port-channel is dynamically maintained.

Use this command to display the port-channel system priority.

show port-channel system priority

Port Mirroring

Port mirroring, which is also known as port monitoring, selects network traffic that you can 
analyze with a network analyzer, such as a SwitchProbe device or other Remote Monitoring 
(RMON) probe.

This command configures a probe port and a monitored port for monitor session (port 
monitoring). Use the source interface <unit/slot/port> parameter to specify the 
interface to monitor. Use rx to monitor only ingress packets, or use tx to monitor only egress 
packets. If you do not specify an {rx | tx} option, the destination port monitors both 
ingress and egress packets. Use the destination interface <unit/slot/port> to 

Valid slot and port number separated by forward slashes.

The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric 
characters.

Indicates whether the Link is up or down.

May be enabled or disabled. The factory default is enabled. 

The status designating whether a particular port-channel (LAG) is statically or 
dynamically maintained. 

A listing of the ports that are members of this port-channel (LAG), in unit/slot/port 
notation. There can be a maximum of eight ports assigned to a given port-channel (LAG).

For each port, lists the timeout (long or short) for Device Type (actor or partner).

Speed of the port-channel port.

This field lists ports that are actively participating in the port-channel (LAG).

The load balance option associated with this LAG. See 

Indicates whether the local preference mode is enabled or disabled. 

Privileged EXEC