Netgear GSM7228PS-100NAS 사용자 설명서

Quality of Service

Management (CLI, Web UI, and SNMP)

IPv6 Management—Allows management of the device through an IPv6 through an IPv6 

address without requiring the IPv6 Routing package in the system. The management 
address can be associated with the network port (front-panel switch ports) and a routine 
interface (port or VLAN).

Stacking

Not all modules are available for all platforms or software releases.

Command Modes

The CLI groups commands into modes according to the command function. Each of the 
command modes supports specific software commands. The commands in one mode are not 
available until you switch to that particular mode, with the exception of the User EXEC mode 
commands. You can execute the User EXEC mode commands in the Privileged EXEC mode.

The command prompt changes in each command mode to help you identify the current 
mode. 

The command modes available on your switch depend on the 

software modules that are installed. For example, a switch that does 
not support BGPv4 does not have the Router BGPv4 Command 
Mode.

 

User EXEC

Switch>

Contains a limited set of commands to view 
basic system information.

Privileged EXEC

Switch#

Allows you to issue any EXEC command, enter 
the VLAN mode, or enter the Global 
Configuration mode.

Global Config

Switch (Config)#

Groups general setup commands and permits 
you to make modifications to the running 
configuration.

VLAN Config

Switch (Vlan)#

Groups all the VLAN commands.