Netgear GSM7228PS-100NAS 사용자 설명서

the command no max-metric router-lsa on-startup. The command no 
max-metric router-lsa summary-lsa

 causes OSPF to send summary LSAs with 

metrics computed using normal procedures defined in RFC 2328.

no max-metric router-lsa [on-startup] [summary-lsa]

OSPF Interface Flap Dampening Commands

Use this command to enable IP event dampening on a routing interface.

dampening [

half-life period] [reuse-threshold suppress-threshold 

max-suppress-time [restart restart-penalty]]

This command disables IP event dampening on a routing interface. 

no dampening

OSPFv2 Router Configuration

Interface Config

The number of seconds it takes for the penalty to reduce by half. The configurable range is 
1-30 seconds. Default value is 5 seconds.

The value of the penalty at which the dampened interface is restored. The configurable range 
is 1-20,000. Default value is 1000.

The value of the penalty at which the interface is dampened. The configurable range is 1- 
20,000. Default value is 2000.

Max Suppress Time The maximum amount of time (in seconds) an interface can be in suppressed state after it 

stops flapping. The configurable range is 1-255 seconds. The default value is four times of 
half-life period. If half-period value is allowed to default, the maximum suppress time defaults 
to 20 seconds.

Penalty applied to the interface after the device reloads. The configurable range is 1- 20,000. 
Default value is 2000.

Interface Config