Netgear GSM7228PS-100NAS 사용자 설명서

of <5-48> lines. The command terminal length 0 disables pagination and, as a result, 
the output of the show running-config command is displayed immediately.

terminal length <0|5-48>

Use this command to set the terminal length to the default value.

no terminal length

Use this command to display the value of the user-configured terminal length size.

show terminal length

Use this command to get notifications when the CPU free memory falls below the configured 
threshold. A notification is generated when the free memory falls below the threshold. 
Another notification is generated once the available free memory rises to 10 percent above 
the specified threshold. To prevent generation of excessive notifications when the CPU free 
memory fluctuates around the configured threshold, only one Rising or Falling memory 
notification is generated over a period of 60 seconds. The threshold is specified in kilobytes. 
The CPU free memory threshold configuration is saved across a switch reboot.

memory free low-watermark processor <

1-1034956>

Logging Commands

This section describes the commands you use to configure system logging, and to view logs 
and the logging settings.

24 lines per page

Privileged EXEC

Privileged EXEC

Privileged EXEC

Global Config

When CPU free memory falls below this threshold, a notification message is triggered. 
The range is 1 to the maximum available memory on the switch. The default is 0 
(disabled).