Netgear GSM7228PS-100NAS 사용자 설명서

Use this command to disable the persistent logging in the switch.

no logging persistent

Email Alerting and Mail Server Commands

This command enables email alerting and sets the lowest severity level for which log 
messages are emailed. If you specify a severity level, log messages at or above this severity 
level, but below the urgent severity level, are emailed in a non-urgent manner by collecting 
them together until the log time expires. You can specify the severitylevel value as either an 
integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), 
alert

 (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7).

logging email [<severitylevel>]

This command disables email alerting.

no logging email

This command sets the lowest severity level at which log messages are emailed immediately 
in a single email message. Specify the severitylevel value as either an integer from 0 to 7 or 
symbolically through one of the following keywords: emergency (0), alert (1), critical 
(2), error (3), warning (4), notice (5), info (6), or debug (7). Specify none to indicate 
that log messages are collected and sent in a batch email at a specified interval.

logging email urgent {<severitylevel> | none }

Global Config

Disabled; when enabled, log messages at or above severity Warning (4) are emailed

Global Config

Global Config

Alert (1) and emergency (0) messages are sent immediately

Global Config