Netgear GSM7228PS-100NAS 사용자 설명서

DNS Client Commands

These commands are used in the Domain Name System (DNS), an Internet directory 
service. DNS is how domain names are translated into IP addresses. When enabled, the 
DNS client provides a hostname lookup service to other components.

Use this command to enable the DNS client.

ip domain lookup

Use this command to disable the DNS client.

no ip domain lookup

Use this command to define a default domain name that the software uses to complete 
unqualified host names (names with a domain name).

 

By default, no default domain name is 

configured in the system. <name> may not be longer than 255 characters and should not 
include an initial period. This <name> should be used only when the default domain name 
list, configured using the ip domain list command, is empty.

ip domain name <name>

Example: The CLI command ip domain name yahoo.com will configure yahoo.com as a default domain name. 
For an unqualified hostname xxx, a DNS query is made to find the IP address corresponding to xxx.yahoo.com.

The IP address of the host as recorded on the DHCP server.

The hardware address of the host that reported the conflict.

The manner in which the IP address of the hosts were found on the DHCP Server.

The time when the conflict was found.

enabled

Global Config

Global Config

none

Global Config