Netgear GSM7228PS-100NAS 사용자 설명서

This command displays the GMRP entries in the Multicast Forwarding Database (MFDB) 
table.

show mac-address-table gmrp

Port-Based Network Access Control Commands

This section describes the commands you use to configure port-based network access 
control (802.1x). Port-based network access control allows you to permit access to network 
services only to and devices that are authorized and authenticated.

This command resets the 802.1x statistics for the specified port or for all ports.

clear dot1x statistics

 

This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll 
PDU indicates that all registrations will shortly be deregistered. Participants will need to 
rejoin in order to maintain registration. There is an instance of this timer on a per-Port, 
per-GARP participant basis. The Leave All Period Timer is set to a random value in the 
range of LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 
centiseconds (2 to 60 seconds). The factory default is 1000 centiseconds (10 seconds).

The GMRP administrative mode for the port. It may be enabled or disabled. If this 
parameter is disabled, Join Time, Leave Time and Leave All Time have no effect.

Privileged EXEC

A unicast MAC address for which the switch has forwarding and or filtering information. 
The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for 
example 01:23:45:67:89:AB. In an IVL system the MAC address is displayed as 8 bytes. 

The type of the entry. Static entries are those that are configured by the end user. 
Dynamic entries are added to the table as a result of a learning process or protocol.

The text description of this multicast table entry.

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

Privileged EXEC