Netgear GS728TP100NAS 사용자 설명서
Configuring Switching Information
136
ProSafe M5300 Switch
OUI-Based
The OUI-based Auto VoIP feature helps provide a classification mechanism for voice packets
that include OUI bits so that they can be prioritized above data packets in order to provide
better Quality of Service (QoS).
that include OUI bits so that they can be prioritized above data packets in order to provide
better Quality of Service (QoS).
From the OUI-based link, you can access the following pages:
•
•
•
OUI Based Properties
Use this page to configure the VLAN ID for the Auto VoIP VLAN. When the switch identifies
voice traffic based on the presence of an OUI, the traffic is placed in the VLAN specified on
this page and assigned the selected 802.1p priority value.
voice traffic based on the presence of an OUI, the traffic is placed in the VLAN specified on
this page and assigned the selected 802.1p priority value.
To display the OUI Based Properties page, click Switching
Auto-VoIP > OUI-based >
Properties.
To configure OUI-based Auto-VoIP properties:
1.
From the VoIP VLAN ID menu, select the VLAN used to segregate VoIP traffic from
other non-voice traffic. All VoIP traffic that matches a value in the known OUI list gets
assigned to this VoIP VLAN.
2.
From the OUI-based priority menu, select the 802.1p priority used for traffic that matches a
value in the known OUI list. If the Auto VoIP mode is enabled and the interface detects an
OUI match, the device assigns the traffic in that session to the traffic class mapped to this
priority value. Traffic classes with a higher value are generally used for time-sensitive traffic.
3.
Click APPLY to update the switch with the changes.
4.
Click CANCEL to abandon the changes.