Netgear GS728TP100NAS 사용자 설명서

MVR Max Multicast Groups

Displays the maximum number of multicast groups that MVR supports. 

MVR Current Multicast Groups

Displays current number of the MVR groups allocated. 

Use MVR Global query response time to set the maximum time to wait for the IGMP 

reports membership on a receiver port. This time applies only to receiver-port leave 

processing. When an IGMP query is sent from a receiver port, the switch waits for the 

default or configured MVR querytime for an IGMP group membership report before 

removing the port from the multicast group membership. The value is equal to the tenths of 

second. The range is from 1 to 100 tenths. The factory default is 5 tenths or one-half.

Use MVR Mode to specify the MVR mode of operation. The factory default is compatible. 

Advanced

From the Advanced link, you can access the following pages:

To display the MVR Group Configuration page, click Switching > MVR > Advanced > MVR 
Group Configuration. A screen similar to the following displays.

Use the MVR Group IP to specify the IP Address for the new MVR group.

Click ADD to add a new MVR group. 

Click DELETE to delete a selected MVR group. 

Click CANCEL to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

Status 

Displays the status of the specific MVR group. 

Members 

Displays the list of ports that participate in the specific MVR group.