Netgear GS728TP100NAS 사용자 설명서

Basic

From the Basic link, you can access the following pages:

To display the Route Configuration page, click Routing









Configuration.

Use the Route Type field to specify default or static. If creating a default route, all that 

needs to be specified is the next hop IP address, otherwise each field needs to be 

specified.

Network Address displays the IP route prefix for the destination.

Subnet Mask indicates the portion of the IP interface address that identifies the attached 

network. This is also referred to as the subnet/network mask.

Next Hop IP Address displays the outgoing router IP address to use when forwarding traffic 

to the next router (if any) in the path towards the destination. The next router will always be 

one of the adjacent neighbors or the IP address of the local interface for a directly attached 

network.

Preference displays an integer value from (1 to 255). The user can specify the preference 

value (sometimes called “administrative distance”) of an individual static route. Among routes 

to the same destination, the route with the lowest preference value is the route entered into 

the forwarding database. By specifying the preference of a static route, the user controls 

whether a static route is more or less preferred than routes from dynamic routing protocols. 

The preference also controls whether a static route is more or less preferred than other static 

routes to the same destination.

Use Identifier to specify the description of this route that identifies the route.

Click ADD to add a new static route entry to the switch.

Click DELETE to delete a existing static route entry from the switch.