Netgear GS728TP100NAS 사용자 설명서

To configure TACACS+ server settings:

Use TACACS+ Server to enter the configured TACACS+ server IP address.

Use Priority to specify the order in which the TACACS+ servers are used. It should be 

within the range 0-65535.

Use Port to specify the authentication port. It should be within the range 0-65535.

Use Key String to specify the authentication and encryption key for TACACS+ 

communications between the device and the TACACS+ server. The valid range is 0-128 

characters. The key must match the encryption used on the TACACS+ server.

Use Connection Timeout to specify the amount of time that passes before the connection 

between the device and the TACACS+ server time out. The range is between 1-30.

Click ADD to add a new server to the switch. This button is only available to READWRITE 

users. These changes will not be retained across a power cycle unless a save is performed.

Click DELETE to delete the selected server from the configuration.

Authentication List Configuration

The Authentication List folder contains links to the following features:

You use this page to configure login lists. A login list specifies the authentication method(s) 
you want to be used to validate switch or port access for the users associated with the list. 
The pre-configured users, admin and guest, are assigned to a pre-configured list named 
defaultList, which you may not delete. All newly created users are also assigned to the 
defaultList until you specifically assign them to a different list

To display the Login Authentication List page, click Security 





 Login Authentication List.