Netgear GS728TP100NAS 사용자 설명서
Managing Device Security
373
ProSafe M5300 Switch
To configure the HTTP server settings:
1.
Use HTTP Access to specify whether the switch may be accessed from a web browser.
If you choose to enable web mode you will be able to manage the switch from a web
browser. The factory default is enabled.
2.
Use Java Mode to enable or disable the java applet that displays a picture of the switch at
the top right of the screen. If you run the applet you will be able to click on the picture of the
switch to select configuration screens instead of using the navigation tree at the left side of
the screen. The factory default is disabled.
3.
Use HTTP Session Soft Timeout (Minutes) to set the inactivity time-out for HTTP
sessions. The value must be in the range of (1 to 60) minutes. The default value is 5
minutes. The currently configured value is shown when the web page is displayed.
4.
Use HTTP Session Hard Timeout (Hours) to set the hard time-out for HTTP sessions.
This time-out is unaffected by the activity level of the session. The value must be in the
range of (1 to 168) hours. The default value is 24 hours. The currently configured value is
shown when the web page is displayed.
5.
Use Maximum Number of HTTP Sessions to set the maximum allowable number of HTTP
sessions. The value must be in the range of (0 to 16). The default value is 16. The currently
configured value is shown when the web page is displayed.
Field
Description
Authentication List
Shows the authentication list which HTTP are using.
HTTPS
From the HTTPS link, you can access the following pages:
•
•
•
HTTPS Configuration
Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using
a Web interface, secure HTTP can help ensure that communication between the
management system and the switch is protected from eavesdroppers and man-in-the-middle
attacks.
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using
a Web interface, secure HTTP can help ensure that communication between the
management system and the switch is protected from eavesdroppers and man-in-the-middle
attacks.
Use the Secure HTTP Configuration page to configure the settings for HTTPS
communication between the management station and the switch.
communication between the management station and the switch.
To display the Secure HTTP Configuration page, click Security
Access > HTTPS
HTTPS
Configuration.