Netgear GS728TP100NAS 사용자 설명서
Configuration Examples
523
ProSafe M5300 Switch
MSTP Example Configuration
This example shows how to create an MSTP instance from the GSM7352Sv1 or
GSM7352Sv2 switch. The example network has three different ProSafe that serve different
locations in the network. In this example, ports 1/0/1-1/0/5 are connected to host stations, so
those links are not subject to network loops. Ports 1/0/6 - 1/0/8 are connected across
switches 1, 2 and 3.
GSM7352Sv2 switch. The example network has three different ProSafe that serve different
locations in the network. In this example, ports 1/0/1-1/0/5 are connected to host stations, so
those links are not subject to network loops. Ports 1/0/6 - 1/0/8 are connected across
switches 1, 2 and 3.
Ports 1/0/1 - 1/0/5
Connected to Hosts
Connected to Hosts
Ports 1/0/1 - 1/0/5
Connected to Hosts
Connected to Hosts
Ports 1/0/1 - 1/0/5
Connected to Hosts
Ports 1/0/6 - 1/0/8
Connected to Switch 2 and 3
Connected to Switch 2 and 3
Ports 1/0/6 - 1/0/8
Connected to Switch 1 and 3
Connected to Switch 1 and 3
1/0/1 - 1/0/5 Switch 1
Root Bridge
Root Bridge
Switch 2
Switch 3
Ports 1/0/6 - 1/0/8
Connected to
Connected to
Switch 2 and
Perform the following procedures on each switch to configure MSTP:
1.
Use the VLAN Configuration screen to create VLANs 300 and 500 (see
2.
Use the VLAN Membership screen to include ports 1/0/1 - 1/0/8 as tagged (T) or untagged
(U) members of VLAN 300 and VLAN 500 (see
120).
3.
143).
Use the default values for the rest of the STP configuration settings. By default, the STP
Operation Mode is MSTP and the Configuration Name is the switch MAC address.
Operation Mode is MSTP and the Configuration Name is the switch MAC address.
4.
From the CST Configuration screen, set the Bridge Priority value for each of the three
switches to force Switch 1 to be the root bridge:
•
Switch 1: 4096
•
Switch 2: 12288
•
Switch 3: 20480
Note:
Bridge priority values are multiples of 4096.