Netgear GS728TP100NAS 사용자 설명서

The following table describes the Basic Stack Status fields.

Unit ID

The unit ID of the specific switch.

Switch Description

The description for the unit can be configured by the user.

Serial Number

The unique box serial number for this switch.

Uptime

The displays the relative time since the last reboot of the switch.

Preconfigured Model Identifier

This field displays the model type assigned by the device 
manufacturer to identify the device.

Plugged-in Model Identifier

This field displays the model type assigned by the device 
manufacturer to identify the plugged-in device.

Detected Code Version

This field indicates the detected version of code on this unit.

Detected Code Version in Flash

The displays the Release number and version number of the code 
stored in flash.

SFS Last Attempt Status

This displays the status of last tried stack firmware synchronisation. 
“None” is the default value if SFS has not been tried.

Stack Port Configuration

By default, the stack ports on each switch are configured for stacking. However, you can use 
these ports as standard Ethernet ports. Use the Stack Port configuration page to configure 
the mode of the stack ports and to view information about the ports.

To display the Stack Port Configuration page, click System 







Port Configuration. A screen similar to the following is displayed (the page is shown in two 
parts).