Netgear GS724TS-100NAS 사용자 설명서

 

To configure global CoS settings: 

Select the Global radio button to configure the trust mode settings that apply to all 

interfaces. 

Alternatively, you can select the Interface radio button to apply trust mode settings to 
individual interfaces. The per-interface setting overrides the global settings.

Select the trust mode for all interfaces (Global Trust Mode) or the selected interface 

(Interface Trust Mode). This setting determines the type of CoS marking to trust when the 

frame enters the port.

Untrusted. Do not trust any CoS packet marking at ingress.

802.1p. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The 

QoS setting lets you map each of the eight priority levels to one of four internal 
hardware priority queues: High, Normal, Low, and Lowest.

DSCP. The six most significant bits of the DiffServ field are called the Differentiated 

Services Code Point (DSCP) bits.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

If you change any of the settings on the page, click Apply to send the updated configuration 

to the switch.

CoS Interface Configuration

Use the CoS Interface Configuration page to apply an interface shaping rate to all interfaces 
or to a specific interface.

To display the CoS Interface Configuration page, click the QoS 

 CoS tab, and then click the 

 CoS Interface Configuration link.