Netgear GS724TS-100NAS 사용자 설명서
Chapter 4: Configuring Quality
of
Service
|
145
GS716Tv2 and GS724Tv3 Software Administration Manual
•
Mark IP DSCP. These packets are marked by DiffServ with the specified DSCP
value before being presented to the system forwarding element. This selection
requires that the DSCP value field be set.
requires that the DSCP value field be set.
5.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6.
If you change any of the settings on the page, click Apply to send the updated configuration
to the switch. Configuration changes take effect immediately.
7.
Click Refresh to refresh the page with the most current data from the switch.
Service Configuration
Use the Service Configuration page to activate a policy on an interface.
To display the page, click QoS
DiffServ Advanced Service Configuration.
To configure DiffServ policy settings on an interface:
1.
To configure DiffServ policy settings for a physical port, click PORTS.
2.
To configure DiffServ policy settings for a Link Aggregation Group (LAG), click LAGS.
3.
To configure DiffServ policy settings for both physical ports and LAGs, click ALL.