Netgear GS724TS-100NAS 사용자 설명서

MAC Filter Configuration

Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into 
and out of specified ports on the system.

To display the MAC Filter Configuration page, click Security 

 Traffic Control, and then click 

 MAC Filter Configuration link.

 

To configure MAC filter settings: 

To configure a new MAC filter:
a. Select Create Filter from the MAC Filter menu. If no filters have been configured, this 

is the only option available.

b.  From the VLAN ID menu, select the VLAN to use with the MAC address to fully 

identify packets you want filtered. You can change this field only when the Create 

Filter option is selected from the MAC Filter menu.

c.  In the MAC Address field, specify the MAC address of the filter in the format 

00:01:1A:B2:53:4D. You can change this field when you have selected the Create 

Filter option.

You cannot define filters for the following MAC addresses:

00:00:00:00:00:00

01:80:C2:00:00:00 to 01:80:C2:00:00:0F

01:80:C2:00:00:20 to 01:80:C2:00:00:21

FF:FF:FF:FF:FF:FF 

d.  Click the orange bar under the Source Port Members heading to display the 

available ports. Select the port(s) to include in the inbound filter. If a packet with the 

MAC address and VLAN ID you specify is received on a port that is not in the list, it 

will be dropped.