Netgear GS724TS-100NAS 사용자 설명서

 

To use the ACL Wizard:

Determine the type of ACL to configure and create a MAC ACL, standard IP ACL, or 

extended IP ACL.

To permit or deny traffic based on the Source MAC Address, create a MAC ACL.

To permit or deny traffic based on the Destination MAC Address, create a MAC ACL.

To permit or deny traffic based on the Source IP Address, create a Standard ACL.

To permit or deny traffic based on the Destination IP Address, create an Extended 

ACL.

To permit or deny traffic based on the TCP or UDP Source Port ID, create an 

Extended ACL.

To permit or deny traffic based on the TCP or UDP Destination Port ID, create an 

Extended ACL.

Click the Permit or Deny link associated with the access criteria on the ACL Wizard page.

The switch redirects you to a page that contains the fields to configure the ACL rule, and 
several of the fields are preconfigured. For example, if you select the Permit link 
associated with the Select Devices Based on Source IP Address option, the Source IP 
Address Rules page displays, and the only information you must provide is the source IP 
address and source mask.

Configure the desired rule.

Click Apply to save the rule.

MAC ACL

A MAC ACL consists of a set of rules which are matched sequentially against a packet. When 
a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken 
and the additional rules are not checked for a match.

There are multiple steps involved in defining a MAC ACL and applying it to the switch: