Netgear GS724TS-100NAS 사용자 설명서

subnet mask. A wildcard mask is in essence the inverse of a subnet mask. For 
example, to apply the rule to all hosts in the 192.168.1.0/24 subnet, you type 
0.0.0.255 in the Source IP Mask field. This field is required when you configure a 
source IP address.

To delete an IP ACL rule, select the check box associated with the rule, and then click 

Delete.

To update an IP ACL rule, select the check box associated with the rule, update the desired 

fields, and then click Apply. You cannot modify the Rule ID of an existing IP rule.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

If you change any of the settings on the page, click Apply to send the updated configuration 

to the switch. Configuration changes take effect immediately.

IP Extended Rule

Use the IP Extended Rules page to define rules for IP-based extended ACLs. The access list 
definition includes rules that specify whether traffic matching the criteria is forwarded 
normally or discarded.

There is an implicit “deny all” rule at the end of an ACL list. This 

means that if an ACL is applied to a packet and if none of the explicit 
rules match, then the final implicit “deny all” rule applies and the 
packet is dropped.

To display the IP extended Rules page, click Security 

 ACL, then click the Advanced  IP 

Extended Rules link. In the following figure, an extended IP ACL exists, and one rule has 
been configured.