Netgear GS724TS-100NAS 사용자 설명서

To modify the settings for an existing host, select the check box next to the host, change the 

desired information, and click Apply.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

The Status field in the Server Configuration table shows whether the remote logging host is 
currently active.

Trap Logs

Use the Trap Logs page to view information about the SNMP traps generated on the switch. 

To access the Trap Logs page, click the Monitoring 

 Logs tab, and then click the Trap Logs 

link.

 

The following table describes the Trap Log information displayed on the screen. 

The page also displays information about the traps that were sent.

Number of Traps Since 
Last Reset

The number of traps that have occurred since the switch last reboot.

Trap Log Capacity

The maximum number of traps stored in the log. If the number of traps exceeds the 
capacity, the entries will overwrite the oldest entries.

Number of Traps Since 
Log Last Viewed

The number of traps that have occurred since the traps were last displayed. 
Displaying the traps by any method (such as terminal interface display, Web 
display, or upload file from switch) will cause this counter to be cleared to 0.