Netgear GS724TS-100NAS 사용자 설명서

After activating an image, you must perform a system reset of the 

switch in order to run the new code.

To remove the selected image from permanent storage on the switch, select the Delete 

Image check box. You cannot delete the active image.

Click Cancel to cancel the operation on the screen and reset the data on the screen to the 

latest value of the switch.

Click Apply to apply the settings to the switch.

Dual Image Status

You can use the Dual Image Status page to view information about the system images on the 
device. 

To display the Dual Image Status page, click Maintenance > File Management 

 Dual Image 

 Dual Image Status.

 

The following table describes the information on the Dual Image Status page.

Unit

The unit ID of the switch is always 1.

Image1 Ver

Displays the version of the image1 code file.

Image2 Ver

Displays the version of the image2 code file.