Netgear GS724TS-100NAS 사용자 설명서

To define system information:

Open the System Information page.

Define the following fields:

System Name. Enter the name you want to use to identify this switch. You may use 

up to 31 alphanumeric characters. The factory default is blank.

System Location. Enter the location of this switch. You may use up to 31 

alphanumeric characters. The factory default is blank.

System Contact. Enter the contact person for this switch. You may use up to 31 

alphanumeric characters. The factory default is blank.

Click Apply. 

The system parameters are applied, and the device is updated.

The following table describes the status information the System Page displays.

IP Configuration

Use the IP Configuration page to configure network information for the management 
interface, which is the logical interface used for in-band connectivity with the switch through 
any of the switch's front panel ports. The configuration parameters associated with the 
switch's network interface do not affect the configuration of the front panel ports through 
which traffic is switched or routed.

To access the page, click System 

 Management  IP Configuration. A screen similar to the 

following displays.

Serial Number

The serial number of the switch.

System Object ID

The base object ID for the switch's enterprise MIB.

Date & Time

The current date and time.

System Up Time

Displays the number of days, hours, and minutes since the last system 
restart.

Base MAC Address

The universally assigned network address.

Model Name

The model name of the switch.

Boot Version

The boot code version of the switch.

Software Version

The software version of the switch.