Netgear GS724TS-100NAS 사용자 설명서

Tag All: Select the ports on which all frames transmitted for this VLAN will be tagged. 

All the ports will be included in the VLAN.

Remove All: This selection has the effect of excluding all ports from the selected 

VLAN.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

If you make any changes to this page, click Apply to send the updated configuration to the 

switch. Configuration changes take place immediately.

Port VLAN ID Configuration

The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface. 
There are certain requirements for a PVID:

All ports must have a defined PVID.

If no other value is specified, the default VLAN PVID is used.

If you want to change the port’s default PVID, you must first create a VLAN that includes 

the port as a member.

Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port.

To access the Port PVID Configuration page, click Switching

 VLAN  Advanced  Port 

PVID Configuration.