Netgear GS748TS 사용자 설명서
GS700TS Smart Switch Software Administration Manual
Configuring Switching Settings
4-28
v1.0, June 2009
To remove a Voice VLAN OUI:
1. Click Switching > Voice VLAN > Advanced > OUI. The Voice VLAN OUI screen displays.
2. Select the OUI entry.
3. Click DELETE to remove the entry.
To restore Voice VLAN OUI factory defaults:
1. Click Switching > Voice VLAN > Advanced > OUI. The Voice VLAN OUI screen displays.
2. Click RESTORE DEFAULTS to restore the factory defaults.
STP
Spanning Tree Protocol (STP) provides network topology for any arrangement of bridges. STP
also provides a single path between end stations on a network, eliminating loops. Loops occur
when alternate routes exist between hosts. Loops in an extended network can cause bridges to
forward traffic indefinitely, resulting in increased traffic and reducing network efficiency.
also provides a single path between end stations on a network, eliminating loops. Loops occur
when alternate routes exist between hosts. Loops in an extended network can cause bridges to
forward traffic indefinitely, resulting in increased traffic and reducing network efficiency.
The STP menu contains the following options:
•
•
Basic
The STP Basic menu contains the following options:
•
STP Configuration
The Basic STP Configuration screen contains parameters for configuring STP on the device.
To configure STP on the device:
1. Click Switching > STP > Basic > STP Configuration. The Basic STP Configuration screen
displays: