Netgear GS748TS 사용자 설명서

7-3

Monitoring the Switch

The Log Filter screen contains fields for defining which events are recorded to which logs. Log 
messages are listed from the highest severity to the lowest severity level. 

To configure log filters:

1. Click Monitoring > Logs > Log Filter. The Log Filter screen displays:

The Log Filter screen contains the following fields:

•

RAM Logs – Select the minimum message severity level to appear in the RAM Log.

 

The 

following are the available message severity levels:

–

Emergency – Indicates the system is not functioning. Emergency is the highest 
warning level. If the system is down or not functioning properly, an emergency log 
message is saved to the specified logging location.

–

Alert – Indicates the system needs immediate attention. Alert is the second highest 
warning level. An alert log is saved, if there is a serious device malfunction; for 
example, all device features are down.

–

Critical – Indicates the system is in a critical state. Critical is the third highest warning 
level. A critical log is saved if a critical device malfunction occurs; for example, two 
device ports are not functioning, while the rest of the device ports remain functional.

–

Error – Indicates a system error has occurred; for example, if a single port is offline.

–

Warning – Indicates the lowest level of a system warning. The system is functioning, 
but an operational problem has occurred.

–

Notice – Indicates the system is functioning properly, but a system notice is logged.

–

Informational – Provides device information.