Netgear GS748TS 사용자 설명서

Managing System Settings

3-16

–

Force Master – Forces the selection of a Stacking Master. This causes the new Master 
unit to take control of the current configuration of the Stack. The old Master is reset 
and becomes the Secondary Master. Note that only Unit 1 or Unit 2 can be the 
Stacking Master.

2. Select the Master Election mode.

3. If you selected Force Master, select either 1 or 2 from the stack list.

4. Click APPLY to update the device.

5. Reset the device for the new settings to take effect. See 

 for detailed instructions on 

resetting the device.

The Stack Management screen allows network managers to assign specific Unit numbers to 
stacking members or enable the software to automatically assign Unit numbers. Assignments take 
effect after reset.

To configure Stack Management:

Click System > Stacking > Advanced > Stack Management. The Stack Management screen 
displays:

The Stack Management screen contains the following fields:

•

Unit No. – Displays the stacking member’s current Unit number. Possible values are 1-6.