Netgear FS508 사용자 설명서
Connector Pin Assignments
B-1
Appendix B
Connector Pin Assignments
This appendix provides information on the RJ-45 plug and the vista RJ-45 connector that is used
for the NETGEAR Model FS508 Fast Ethernet Switch.
for the NETGEAR Model FS508 Fast Ethernet Switch.
RJ-45 Plug and vista RJ-45 Connector
In a Fast Ethernet network, it is important that all 100BASE-T certified Category 5 cabling use
RJ-45 plugs. The RJ-45 plug accepts 4-pair unshielded twisted pair (UTP) or shielded twisted
pair (STP) 100
RJ-45 plugs. The RJ-45 plug accepts 4-pair unshielded twisted pair (UTP) or shielded twisted
pair (STP) 100
Ω
cable and connects into the vista RJ-45 connector.
The vista RJ-45 connector (also referred to as a 10/100 Mbps port) is used to connect stations,
hubs, and switches through UTP cable and supports 100 Mbps data transmission.
hubs, and switches through UTP cable and supports 100 Mbps data transmission.
The RJ-45 plug and vista RJ-45 connector are both illustrated in
Key:
1 to 8 = Pin numbers
Figure 5-1.
RJ-45 plug and vista RJ-45 connector with built-in LEDs
711EA
1
8
12345678
FS508.BK Page 1 Wednesday, May 7, 1997 10:29 AM