Net Optics Director 사용자 설명서

39

Be aware of these similar pairs of commands:

 clears the pending filter list, while filter clear clears the CAM

 shows the pending filter list, while filter running shows the CAM

 copies the pending filter list to the CAM, while filter sync copies the CAM to the pending filter list

1

2

    filter discard to clear
    filter list to view contents

1

2

    filter clear to clear
    filter running to view contents

   filter commit

    filter sync

The capacity of Director's filtering function is roughly 1,000 filter elements per chassis, where a filter element is 

a port list or a filter parameter. For example, filter add in_ports=n1.1-n1.7 ip_proto=6 vlan=100 action=redir

redir_ports=m.1-m.5,m.10 has four filter elements:

Counting filter elements is only a rough gauge of filter utilization, and is not recommended. Instead, examine the 

pending filter list or CAM contents with filter list and filter running commands. The filter resource utilization is 

displayed after the filter list. 

create filter configurations. However, there is only one CAM, so any time a user executes a commit or filter commit

filters on Director. For this reason, it is a good idea to use a filter sync command to get the current contents of the