Netgear M4100-D10-POE 사용자 설명서

Use this command to display the port-channel system priority.

show port-channel system priority

Port Mirroring

Port mirroring, which is also known as port monitoring, selects network traffic that you can 
analyze with a network analyzer, such as a SwitchProbe device or other Remote Monitoring 
(RMON) probe.

This command configures a probe port and a monitored port for monitor session (port 
monitoring). Use the source interface <slot/port> parameter to specify the interface 
to monitor. Use rx to monitor only ingress packets, or use tx to monitor only egress packets. 
If you do not specify an {rx | tx} option, the destination port monitors both ingress and 
egress packets. Use the destination interface <slot/port> to specify the interface 
to receive the monitored traffic. Use the mode parameter to enabled the administrative mode 
of the session. If enabled, the probe port monitors all the traffic received and transmitted on 
the physical monitored port. 

monitor session <session-id> {source interface <slot/port> [{rx | 

The status designating whether a particular port-channel (LAG) is statically or 
dynamically maintained. 

•  Static  - The port-channel is statically maintained.

•  Dynamic  - The port-channel is dynamically maintained.

A listing of the ports that are members of this port-channel (LAG), in slot/port notation. 

There can be a maximum of eight ports assigned to a given port-channel (LAG).

For each port, lists the timeout (long or short) for Device Type (actor or partner).

Speed of the port-channel port.

This field lists the ports that are actively participating in the port-channel (LAG).

Indicates whether the local preference mode is enabled or disabled. 

Privileged EXEC

Global Config