Netgear M7100 사용자 설명서

Web Interface: Configure VRRP on a Master Router

Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration. 

A screen similar to the following displays.

b.  For Routing Mode, select the Enable radio button.

Click Apply to save the settings.

Assign the IP address 192.150.2.1 to port 1/0/2:

a. Select Routing > IP > Advanced > IP Interface Configuration. 

A screen similar to the following displays.

b.  Scroll down and select the Interface 1/0/2 check box. 

Now 1/0/2 appears in the Interface field at the top.

c.  Enter the following information:

In the IP Address field, enter 192.150.2.1.

In the Network Mask field, enter 255.255.0.0.

In the Routing Mode field, select Enable.

d.  Click Apply to save the settings.

Enable VRRP on port 1/0/2.

a. Select Routing > VRRP > Advanced > VRRP Configuration.