Netgear M7100 사용자 설명서
Chapter 27. IPv6 Interface Configuration
|
425
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. In the Interface list, select 1/0/1.
c. In the IPv6 Prefix field, enter 2000::2.
d. In the Length field, enter 64.
e. In the EUI64 field, select Disable.
f. Click Add.
Create an IPv6 Network Interface
The IPv6 network interface is the logical interface used for in-band connectivity with the
switch using any of the switch’s front panel ports. The configuration parameters associated
with the switch’s network interface do not affect the configuration of the front panel ports
through which traffic is switched or routed.
switch using any of the switch’s front panel ports. The configuration parameters associated
with the switch’s network interface do not affect the configuration of the front panel ports
through which traffic is switched or routed.
To access the switch over an IPv6 network you must first configure it with IPv6 information
(IPv6 prefix, prefix length, and default gateway).
(IPv6 prefix, prefix length, and default gateway).