Netgear M7100 사용자 설명서

b.  Under Private VLAN Host Interface Configuration, select the 1/0/4 and 1/0/5 

interface check box. 

c.  In the Host Primary VLAN field, enter 100.

d.  In the Host Secondary VLAN field, enter 102.

e.  Click Apply to save the settings.

Map Private-VLAN Promiscuous Port

The example is shown as CLI commands and as a Web interface procedure.

CLI: Map Private-VLAN Promiscuous Port 

Use the following commands to map private-VLAN promiscuous port 1/0/1 to a primary VLAN 
(100) and to secondary VLANs (101-102).

(Netgear Switch)  #config 

(Netgear Switch)  (Config)#interface 1/0/1

(Netgear Switch)  (Interface 1/0/1)#switchport private-vlan mapping 100 101-102

(Netgear Switch)  (Interface 1/0/1)#end

Web Interface: Map Private-VLAN Promiscuous Port 

1.Map private-VLAN promiscuous port 1/0/1 to a primary VLAN (100) and to selected 
secondary VLANs (101-102).

a. Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous 

Interface Configuration. A screen similar to the following displays.