Netgear M7100 사용자 설명서
552
|
Chapter 33. iSCSI
ProSafe M4100 and M7100 Managed Switches
Enable iSCSI Awareness with VLAN Priority Tag
The example is shown as CLI commands and as Web interface procedure
CLI: Enable iSCSI Awareness with VLAN Priority Tag
Use the following commands to enable iSCSI awareness, select VPT, and set VLAN number
and aging time.
and aging time.
(Netgear Switch) #config
(Netgear Switch) (Config) #iscsi enable
(Netgear Switch) (Config) #iscsi cos vpt 5
(Netgear Switch) (Config) #iscsi aging time 10
(Netgear Switch) (Config) #exit
Web Interface: Enable iSCSI Awareness with VLAN Priority Tag
1.
1.Enable iSCSI awareness, select VPT, and set VLAN number and aging time.
a. Select Switching > iSCSI > Basic.
A screen similar to the following displays.
b. b.Enter the following information:
•
"In the iSCSI Status, select Enable.
•
"In the QoS Profile, select VLAN Priority Tag.
•
"In the VLAN Priority Tag, select 5 (default value).
•
"In the remark, select Enable (default value).
•
"In the iSCSI Aging Time, enter 10 (default value).
c. Click Apply.