Netgear M7100 사용자 설명서
Chapter 7. OSPF
|
89
ProSafe M4100 and M7100 Managed Switches
Web Interface: Configure an Inter-area Router
1.
Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration.
A screen similar to the following displays.
b. For Routing Mode, select the Enable radio button.
c.
Click Apply to save the settings.
2.
Assign IP address 192.150.2.1 to port 1/0/2.
a. Select Routing > IP > Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 1/0/2 check box.
Now 1/0/2 appears in the Interface field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.150.2.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Administrative Mode field, select Enable.
d. Click Apply to save the settings.
3.
Assign IP address 192.150.3.1 to port 1/0/3:
a. Select Routing > IP > Advanced > IP Interface Configuration.