Netgear JGS524E 전단

This symbol appears in accordance with the European Union Directive 2002/96 on the Waste 

Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the 

European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the 

WEEE directive.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of 

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to 

change without notice. Other brand and product names are registered trademarks or trademarks of their 

respective holders. © NETGEAR, Inc. All rights reserved.
For indoor use only in all EU countries and Switzerland.

For the complete EU Declaration of Conformity, visit 

Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability, 

NETGEAR reserves the right to make changes to the products described in this document without notice. 

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit 

layout(s) described herein.

Plus switches are plug and play.You can install a configuration utility to select 
additional options to manage and customize the switch for your network. This utility 
is on the resource CD that was shipped with the switch.

The configuration utility is installed on your computer and is only supported 

on Windows.

Insert the resource CD into a computer that is connected to the switch.

Click Install ProSafe Plus Utility and follow the prompts to install the program.

The switch configuration utility is installed in the program directory of your 
computer and a ProSafe Plus Utility icon is placed on your desktop.

Double-click the ProSafe Plus Utility icon.
The configuration home screen displays a list of plus switches that it discovers 
on the local network. 

Select the switch that you want to configure.
You are asked to enter the password for the switch. 

Enter the switch’s password in the password field.
The switch’s default password is password.

Use the utility to configure the switch.
For a description of plus features, see the ProSafe Plus Switch Configuration 
Utility User Guide. You can access the user guide through links on the Help tab 
of the utility or on the resource CD.

Network interface

RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T

Network cable

Category 5e (Cat 5e) or better Ethernet cable

Ports

24

Power 

100-240VAC 50-60Hz,0.9A max.

Power consumption

13.5W max.

Weight

1.73 Kg (3.79 lbs)

Dimensions 
(W x D x H)

330 mm x 173 mm x 43 mm
13 in. x 6.8 in. x 1.7 in.

Operating 
temperature

0–40° C (32–104° F)

Operating humidity

10%–90% relative humidity, noncondensing

Electromagnetic 
compliance

CE Class A, FCC Class A, VCCI Class A, C-Tick Class A, CCC

Safety agency 
approvals

CE mark, Commercial UL listed (UL 60950-1), CB, CCC

After installing your device, locate the serial number on the label of your product and 
use it to register your product at 

.

You must register your product before you can use NETGEAR telephone support. 
NETGEAR recommends registering your product through the NETGEAR web site. 
For product updates and web support, visit 

.

IG.fm  Page 2  Thursday, September 20, 2012  9:21 AM