Netgear M4100-D12G 사용자 설명서

DiffServ Show Commands

Use the DiffServ show commands to display configuration and status information for classes, 
policies, and services. You can display DiffServ information in summary or detailed formats. 
The status information is only shown when the DiffServ administrative mode is enabled.

This command displays all configuration information for the specified class. The 
<class-name> 

is the name of an existing DiffServ class.

show class-map <class-name>

• Privileged EXEC

• User EXEC

If the class-name is specified the following fields are displayed:

If you do not specify the Class Name, this command displays a list of all defined DiffServ 
classes. The following fields are displayed:

The name of this class.

A class type of ‘all’ means every match criterion defined for the class is evaluated 

simultaneously and must all be true to indicate a class match. 

The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.

The Match Criteria fields are only displayed if they have been configured. Not all 
platforms support all match criteria values. They are displayed in the order entered by 
the user. The fields are evaluated in accordance with the class type. The possible Match 
Criteria fields are: Destination IP Address, Destination Layer 4 Port, Destination MAC 

Address, Ethertype, Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP 

Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, and 
Source Layer 4 Port.

The values of the Match Criteria.

The name of this class. (Note that the order in which classes are displayed is not 
necessarily the same order in which they were created.)

A class type of ‘all’ means every match criterion defined for the class is evaluated 

simultaneously and must all be true to indicate a class match.

The name of an existing DiffServ class whose match conditions are being referenced by 
the specified class definition.