Netgear M4100-12G-POE+ 사용자 설명서

This command sets how frequently Leave All PDUs are generated the default and only has 
an effect when GVRP is enabled.

no set garp timer leaveall

• Interface Config

• Global Config

This command displays GARP information.

show garp

• Privileged EXEC

• User EXEC

GVRP Commands

This section describes the commands you use to configure and view GARP VLAN 
Registration Protocol (GVRP) information. GVRP-enabled switches exchange VLAN 
configuration information, which allows GVRP to provide dynamic VLAN creation on trunk 
ports and automatic VLAN pruning.

If GVRP is disabled, the system does not forward GVRP messages.

This command enables GVRP on the system.

set gvrp adminmode

The administrative mode of GARP Multicast Registration Protocol (GMRP) for the 
system.

The administrative mode of GARP VLAN Registration Protocol (GVRP) for the 
system.

disabled

Privileged EXEC