Netgear WFS709TP-100NAS 사용자 가이드

Configuring 802.1x Authentication

7-3

For the WFS709TP to communicate with the authentication server, you must configure the IP 
address, authentication port, and accounting port of the server on the WFS709TP. The 
authentication server must be configured with the IP address of the RADIUS client, which here is 
the WFS709TP. Both the WFS709TP and the authentication server must be configured to use the 
same shared secret.

As described in 

, the client communicates with the 

WFS709TP through a Generic Routing Encapsulation (GRE) tunnel in order to form an 
association with an AP and to authenticate to the network. Therefore, the network authentication 
and encryption configured for an ESSID must be the same on both the client and the WFS709TP.

 describes 802.1x configuration on the 

WFS709TP.

 is an overview of the parameters that you need to configure on 802.1x authentication 

components when 802.1x authentication is terminated on the WFS709TP (AAA FastConnect). 
User authentication is performed either via the WFS709TP’s internal database or by a non-802.1x 
server.