Netgear WFS709TP-100NAS 사용자 가이드

Configuring Management Utilities

13-19

3. Select the destination to where the file or image is to be copied.

4. Click Apply.

Captive Portal and IEEE 802.1x with AAA FastConnect require that you install a server certificate 
in the WFS709TP (see 

). There is a default server certificate installed in the WFS709TP, however 

this certificate does not guarantee security for production networks. NETGEAR strongly 
recommends that you replace the default server certificate in the WFS709TP with a custom 
certificate issued for your site or domain by a trusted certificate authority (CA).

To obtain a security certificate for the WFS709TP, generate and submit a Certificate Signing 
Request (CSR) to the CA of your choice. Upon receiving the CA-signed server certificate, install 
the certificate from your PC as described in this section.

Certificates must be in X.509 PEM format.

To install a server certificate in the WFS709TP:

1. Navigate to the Maintenance > Captive Portal > Upload Certificate page.

2. Click Browse to specify the location of the certificate on your PC.

3. Click Upload.

Note: Certificate installation shuts down web server connections.