Netgear WFS709TP-100NAS 사용자 가이드

3-2

Configuring Network Parameters

3. On the Add New VLAN screen (

), enter the VLAN ID.

4. To add physical ports to the VLAN, click Add in the VLAN Members section, then select the 

port to add to the VLAN.

•

You can specify whether the port uses 802.1q tagging.

•

For ports that use 802.1q tagging, you can also specify whether the VLAN is the native 
VLAN for the port (frames on the native VLAN are not tagged). 

5. Click Add.

6. Click Apply.

To assign a static IP address to a VLAN:

1. Navigate to the Configuration > Basic > Network > IP Interfaces page on the browser interface 

(

2. Click Edit for the VLAN you just added.