Netgear m6100 사용자 설명서

The IP address of the TFTP server (option 150).

The address of the TFTP server (siaddr) to be used for Auto Install requests.

You can also enter this information manually.

No BootP or DHCP configuration is saved in the startup-config file.

The TFTP server IP address can be deduced from the multiple sources. It is selected from 
one of the following fields, listed from the highest priority to the lowest:

The sname field of a DHCP or BootP reply

The TFTP server name (option 66) of a DHCP reply

The TFTP server address (option 150) field of a DHCP reply

The siaddr field of a DHCP or BootP reply

A DNS server is required to resolve the IP address of the TFTP server only if the sname or 

option 66 value is used.

After obtaining IP addresses for both the switch and the TFTP server, the Auto Install process 

attempts to download a configuration file. A host-specific configuration file is downloaded, if 
possible. Otherwise, a network configuration file is used as a bridge to get the final 
configuration. For more information, see 

and 

If the DHCP or BootP server specifies a bootfile name, the switch attempts to download a 
host-specific configuration file. The switch makes three unicast TFTP requests for the 
specified bootfile. If the unicast attempts fail, or if a TFTP server address was not provided, 

Auto Install process stops. No broadcast attempts are made.

The bootfile is required for a file type of *.cfg. The bootfile cannot be 

named fastpath.cfg, startup-config, or hpc_broad.cfg. 

These names are reserved.