Netgear GS605AV-100NAS 전단

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste 

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, 

this product should be treated and recycled in accordance with the laws of your jurisdiction 

implementing the WEEE Directive.

© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks 

of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or 

registered trademarks of their respective holders. Information is subject to change without notice. 

 

Standards compatibility

Specifications IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u, 
100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T 
Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1p 
Priority Tags; Jumbo frame (up to 9216 bytes); compatible 
with Windows®, Mac® OS, NetWare™, Linux®

Network interface

RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-
T Ethernet interface

DC Power

7.5W max and 7.5V @1A DC input

Power consumption

2.7W (max)

Physical dimensions 
(W x D x H)

5.40 x 4.01 x 1.30 in (137 x 102 x 33 mm)

Weight

0.204 Kg (0.45 lbs)

Operating temperature

0 to 40

C (32 to 104F)

Operating humidity

10% to 90% relative humidity, noncondensing

Electromagnetic 
compliance

FCC Part 15, Class B; VCCI Class B; C-Tick Class B; 
CE Class B, including EN 55022 and EN 55024

Safety agency approvals CE mark

Port-based QoS

Dark green RJ45 connector: highest priority
Light green RJ45 connector: medium priority
Yellow RJ45 connector: lowest priority

ACL rules (64-entries)

Prioritize audio/video applications

Green mode

Auto power-down mode saves energy when port is unused
Auto green mode detects cable length and adjusts power 
usage

Address database size

8K

Packet buffer memory

128 KB

MAC address aging

300 sec

Switch bandwidth

10 Gbps

Forwarding mode

Store-and-Forward

The switch has no power.
•

Make sure that the power cord is correctly connected to the switch.

•

Make sure that the power adapter is connected to a functioning power outlet. If it is in 
a power strip, make sure that the power strip is turned on. If the socket is controlled 
by a light switch, make sure that the switch is in the on position.

•

Make sure that you are using the NETGEAR power adapter supplied with your 
switch.

Frame filter rate

14,880 frames/sec max for 10M port 
148,800 frames/sec max for 100M port
1,488,000 frames/sec for 1000M port

Frame forward rate

14,880 frames/sec max for 10M port 
148,800 frames/sec max for 100M port
1,488,000 frames/sec max for 1000M port

Network latency (using 
1500-byte packets)

10Mbps: 34us max
100Mbps: 5.5us max
1000Mbps: 3us max 

There is a hardware connection problem.
•

Make sure that the cable connectors are securely plugged in at the switch and the 
device.

•

Make sure that the connected device is turned on.

•

If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure that 
the card or adapter is installed correctly and is working.

•

Make sure that the cable is less than 328 feet (100 meters).

•

Make sure that you use a high quality cable, especially for the gigabit connection.

Thank you for selecting NETGEAR products. 

After completing the Smart Wizard configuration assistant, locate the serial number on the 
bottom label of your product, and use it to register your product at 
http://www.NETGEAR.com/register. 

Registration on the website or over the phone is required before you can use our telephone 
support service. The phone numbers for worldwide regional customer support centers are 
on the Warranty and Support Information card that came with your product. 

Go to http://kbserver.netgear.com for product updates and Web support. GPL may be 
included in this product; go to ftp://downloads.netgear.com/files/GPLnotice.pdf to view 
the GPL license agreement.

GS605AV_IG_08Dec09.fm  Page 2  Tuesday, December 8, 2009  7:53 PM