Netgear 7000 Series 사용자 설명서

9-26

Access Control Lists (ACLs)

To use the Web interface to isolate VLANs on a Layer 3 switch by using ACLs, proceed as 
follows:

1. Create VLAN 24 with IP address 192.168.24.1:

a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar 

to the following displays.

Create ACL 103 to permit all other traffic.

(Netgear Switch) (Config)#access-list 103 permit ip any any

other traffic.

(Netgear Switch) (Config)#interface 1/0/24 

(Netgear Switch) (Interface 1/0/24)#ip access-group 102 in 1 

(Netgear Switch) (Interface 1/0/24)#ip access-group 103 in 2 

(Netgear Switch) (Interface 1/0/24)#exit

other traffic.

(Netgear Switch) (Config)#interface 1/0/48 

(Netgear Switch) (Interface 1/0/48)#ip access-group 101 in 1 

(Netgear Switch) (Interface 1/0/48)#ip access-group 103 in 2 

(Netgear Switch) (Interface 1/0/48)#exit