Netgear 7000 Series 사용자 설명서

4-2

Using the Web Interface

2. Enable Web mode:

a. At the CLI prompt, enter the show network

 

command.

b. Set Web Mode to Enabled.

Follow these steps to start the switch Web interface: 

1. Enter the IP address of the switch in the Web browser address field. 

2. When the Login panel is displayed click Login.

3. .Enter the appropriate User Name and Password. The User Name and associated Password are 

the same as those used for the terminal interface. Click on the Login button. 

4. The System Description Menu displays, with the navigation tree appearing to the left of the 

screen.

5. Make a selection by clicking on the appropriate item in the navigation tree. 

As of software release 7.2, the Web interface has a new look. The new Web interface is called the 
Prosafe Control Center (PCC). 

When you use the switch’s IP address to log into the switch, the following screen displays: